How To Change The Bearings On A Skateboard

How To Change The Bearings On A Skateboard. Be careful when removing your axle nuts not to lose any of the washers in the process. Install new wheel and bearing assemblies.

Pearson Arrow Surfboards 9'6" Noserider Surfboard Seaside Surf Shop from www.seasidesurfshop.com

If resistance felt or grinding sound heard when spinning, replace. Put the kingpin back into place and push it down until it locks in. Install new wheel and bearing assemblies.

Source: www.template.net

Be careful not to damage the axle in the process. Remove the wheels from their bearings, then detach the shields from the bearings.

Source: cleverskateboard.com

The shield can be made of a variety of materials, such. Remove the wheels carefully so as to not inflict any damages to the rest of the board.

Source: shop.ccs.com

When installing new bearings in your wheel. To successfully accomplish this task, secure the wrench and turn till they loosen up.

Source: www.zumiez.com

Remove the wheels with a ratchet or skate tool. Carefully put the shields into their original place.

Source: www.mellowboards.com

Put the bearings back and ensure there is no gap. Be sure to use a bearing spacer and washer, if necessary, as well as a bearing that is designed to work with the truck.

Source: thedarkslide.com

Ensure that you install them with the same process as when setting a direction. Remove the wheels with a ratchet or skate tool.

Source: www.seasidesurfshop.com

Be careful when removing your axle nuts not to lose any of the washers in the process. With your tool, hook the tip of the axle on the wheel.

Source: thedarkslide.com

No need to have a bearing press for this. Follow the below steps to have the bearings pout instantly.

If Damaged Or Torn, Replace.

Carefully put the shields into their original place. Secondly, put the wheels on the skateboard truck in position to bearing and press it down as possible. To clean skateboard wheel bearings:

What Tools Do You Need To Change Skateboard Bearings?

Press with the palm of your hand; When installing, remember to put the spacer (if your board has one) between the two bearings. To successfully accomplish this task, secure the wrench and turn till they loosen up.

Placing New Bearings Into Wheels To Get The New Bearings Into The Wheel, Follow The Same Process That You Usually Would To Set A Bearing Into A Wheel.

If you have metal shields bearings make sure to remove them using a razor blade or something that can get between. The shield can be made of a variety of materials, such. Follow the below steps to have the bearings pout instantly.

1) Remove The Old Bearings From The Wheel.

The skateboard will have one wheel on each side, so they will need to be placed on both sides of the skateboard. To make sure you are pushing it incorrectly, lift one end of your board with one hand to see if the wheel spins without catching on anything (like your bearings). While hooking you should ensure that the tool does not touch the wheel.

If There Is Resistance, You Need To.

Then install the plastic washer followed by a metal washer on top of that. Remove the wheels carefully so as to not inflict any damages to the rest of the board. Now place the wheel on the suspension axle so that the axis lightly touches the tip of the bearing and does not touch the wheel.